Are You VoIP Ready? – QoS (Quality of Service)

postheadericon Are You VoIP Ready? – QoS (Quality of Service)

Normally, when packets are serialized out the router to the Internet, they are sent in a first come first serve  fashion. If your router is equipped with QOS, packets from your PBX or SIP server* can be prioritized ahead of the other non-voice packets thereby keeping the flow of
voice traffic relatively smooth. Most carriers that offer a combined package of voice and data services do just that. RonEK is a partner with several ISPs and one of the first questions on the vendor check list is the IP address of the PBX. Most of the higher end carriers will provide an
end to end managed circuit  which means that they can control the connection from your office to their space in the central office. From there, packets are routed out on their backbone or someone else s backbone depending on the carrier s capacity and the final destination.
Keep in mind that QOS prioritizes packets going out to the other end. Once a packet leaves your premise or your provider s backbone, it is no longer prioritized and subject to the winds and tides of the Internet just like all the other packets. So, when designing a multi-site
network, try to stick with one provider and, if possible, try to do it on an MPLS platform. Usually if you stay within a provider s backbone from end to end, the prioritization will be maintained throughout the connection. Also, there is no way to prioritize packets coming to you until they actually get to you. Many times customers think that if they simply implement QOS that all their voice issues will go away not realizing that they only addressed half of the potential problem. Your connection and QOS is just part of the overall voice session that YOU control. The rest is in the hands of the intermediary (often there is more than one) that controls the path of the packets and then finally, the ISP and equipment at the final destination.
* More about SIP servers in coming articles.

Leave a Reply